Service teams and rental fleets need a rugged, ready-to-go meter they can carry to any site for a quick flow check. The YF-W200H handheld kit clamps onto pipes from DN15 to DN6000, runs all day on battery and logs results for later reporting.
The challenge
- Measurements are short and happen at many different sites.
- Pipes and fluids vary widely, including high-temperature lines.
- The kit must be portable, rugged and quick to set up.
- Results should be logged and exported.
The solution: YF-W200H
The YF-W200H is a handheld transit-time meter supplied as a complete field kit in an aluminum carrying case. See the YF-W200H specifications →
- DN15-DN6000 with selectable transducers.
- ±1% accuracy, 0.2% repeatability.
- -30 to 160 °C with high-temperature transducers.
- 12+ hour Ni-MH battery plus AC adapter.
- Built-in logger (2,000+ lines) and isolated RS232.
Configuration used in this application
| Meter | YF-W200H handheld transit-time |
|---|---|
| Pipe diameter | DN15-DN6000 |
| Accuracy | ±1% |
| Liquid temperature | -30 to 160 °C |
| Power | Ni-MH battery (12+ h); AC adapter |
| Data | Isolated RS232; logger, 2,000+ lines |
| Protection | Transducer IP67 |
| Standard kit | Converter, TM-1 transducers, cables, rail, couplant, case |
How it is deployed
- Carry the case to the pipe and select a straight accessible section.
- Choose and clamp the appropriate transducers, then enter pipe and fluid data.
- Confirm signal strength and read or log instantaneous and totalized flow.
- Transfer logged data over RS232 for the report, then move to the next point.
What the operator gets
- Fast, repeatable spot measurements on demand.
- One kit across small to very large pipes and temperatures.
- All-day battery and rugged case for field use.
- Well suited to rental fleets and distributor stock, with OEM options.
Frequently asked questions
Is the YF-W200H suitable for rental fleets?
Yes, it is a rugged, complete field kit in an aluminum carrying case that can be reused across sites, and OEM branding is available.
How long does the battery last?
The rechargeable Ni-MH battery provides over 12 hours of operation, with an AC adapter included.
Can it measure very large or hot pipes?
It covers DN15-DN6000 and -30 to 160 C using the appropriate transducers.
Have a similar requirement?
Send us your pipe size, pipe material, fluid, temperature and quantity. Our engineers will recommend the right configuration and reply with factory-direct wholesale/OEM pricing in English.
Browse our complete range on the Products page.
Questions about your application? Contact our team or request a quote — we respond within 24 hours.