Category: Industry Applications
News
-
Clamp-On Flow Meters for Data Center Cooling Water Monitoring
Data centers depend on continuous cooling water to remove heat from servers. Flow measurement supports cooling assurance, pump monitoring, energy efficiency and capacity planning — on piping that cannot be shut down. A clamp-on meter installs externally on operating cooling lines, giving flow data without any risk to cooling continuity. Where they are used Chilled…
-
Non-Intrusive Flow Measurement in Food & Beverage: Process Water and CIP
Food and beverage plants measure water, ingredients, CIP (clean-in-place) return and utility lines under strict hygiene and uptime requirements. A clamp-on ultrasonic meter has a specific advantage here: nothing touches the fluid. The transducers sit on the outside of the pipe, so there are no wetted parts to contaminate product, no breach of a hygienic…
-
Clamp-On Ultrasonic Flow Meters for Agricultural Irrigation and Water Allocation
Irrigation districts, farms and agribusinesses need to measure large volumes of water across widely spaced, often unpowered and difficult-to-shut-down canals and pipelines. A clamp-on ultrasonic flow meter fits this reality well: sensors mount on the outside of the pipe with no cutting, no shutdown and no pressure loss, and the same instrument family covers everything…
-
Monitoring Chiller and Boiler Efficiency with a Clamp-On Energy Meter
A chiller or boiler is usually the largest energy consumer in a building, yet its real-world performance is rarely measured continuously. Nameplate COP or efficiency was achieved on a test bench; in service the same machine can drift well below it due to fouling, poor hydronic balance or a low return-water temperature. A clamp-on thermal…
-
HVAC Thermal Energy Sub-Metering and Tenant Billing: A Practical Guide
In a modern commercial building, the central plant makes heating and cooling efficiently — but the question of who used how much is usually left unanswered. A single bulk meter at the energy source tells the total; it cannot split the cost fairly between tenants, floors, departments or data halls. Thermal energy sub-metering with clamp-on…
-
Clamp-On Flow Meter for Chemical Dosing and Corrosive Fluids
On a chemical dosing skid the fluid is often aggressive, the pipe is small, and nobody wants to open the line. That combination rules out many meter types. A non-contact chemical dosing flow meter measures through the pipe wall, so the fluid never touches a sensor. The YF-C3 compact clamp-on flow meter is built for…
-
Clamp-On Ultrasonic Flow Meters in HVAC, District Energy and Building Services
Chilled and hot water flow, BTU/kWh energy metering, hydronic balancing and BMS integration — how clamp-on ultrasonic meters serve HVAC, district cooling/heating and building services without shutting anything down.
-
Clamp-On Ultrasonic Flow Meters in Water and Wastewater Treatment
Clamp-on meters give water and wastewater plants non-intrusive flow measurement without shutdown — on raw water and distribution mains, pump stations, DMA leakage surveys and filter/backwash lines. Applications and model choices.
-
Clamp-On Ultrasonic Flow Meters in Chemical and Process Industries
Non-contact flow measurement for acids, solvents, oils and demineralised water — no wetted parts, no leak path and no shutdown. How chemical and process plants use clamp-on meters for monitoring, verification and high-temperature lines.